The difference between aluminum square and ordinary aluminum square?
Published：
2016/6/3 Clicks：
2097
Aluminum Fangtong is refers to the profile one-time extruded products, and ordinary aluminum Fangtong is to multi bending process, is expected to open, leveling, can be processed products, different process create different products, it may be said that each has its own merits.
Profile side pass commonly used specifications specifications of similar 5050 50*80 50*100 25 * 50 25*100 various, the thickness of the general for 0.8MM-1.2MM, can also according to customer requirements, mold manufacturing.
Common sense common specification is different, the width by 20MM-400MM, height from 30-500 high. In this size range, any customer choice, using conventional thickness 0.6MM-1.0MM, if need to do more specifications, as long as in thickness slightly increased about, can achieve greater product specifications. Need not, direct orders, direct materials, do not need to waste precious time customers.
It is concluded that the same thickness, the profile of aluminum square pass will be more than ordinary aluminum side through the hardness of about 25%. Is the so-called every kind of product has its advantages and disadvantages, people are not perfect, the product is no exception.
Aluminum through general surface treatment is divided into four kinds, an outdoor use is fluorocarbon paint spraying, noble and durable. The second is grainy transfer process, indoor and outdoor use Kun can. The third is roll coating materials, with more than two indoor foreign use. The fourth is powder coating, we suggest the use of indoor is not recommended installed in the outdoor use.
This article comes from: single aluminum plate curtain wall, aluminum arc, the professional supplier of aluminum honeycomb panel wood reserved require attribution, respect the original pay, respect for others is to respect yourself, if violations, we will pursue legal responsibility. More exciting from the golden Batai metal decoration, WeChat public number: jinbatai
Profile side pass commonly used specifications specifications of similar 5050 50*80 50*100 25 * 50 25*100 various, the thickness of the general for 0.8MM-1.2MM, can also according to customer requirements, mold manufacturing.
Common sense common specification is different, the width by 20MM-400MM, height from 30-500 high. In this size range, any customer choice, using conventional thickness 0.6MM-1.0MM, if need to do more specifications, as long as in thickness slightly increased about, can achieve greater product specifications. Need not, direct orders, direct materials, do not need to waste precious time customers.
It is concluded that the same thickness, the profile of aluminum square pass will be more than ordinary aluminum side through the hardness of about 25%. Is the so-called every kind of product has its advantages and disadvantages, people are not perfect, the product is no exception.
Aluminum through general surface treatment is divided into four kinds, an outdoor use is fluorocarbon paint spraying, noble and durable. The second is grainy transfer process, indoor and outdoor use Kun can. The third is roll coating materials, with more than two indoor foreign use. The fourth is powder coating, we suggest the use of indoor is not recommended installed in the outdoor use.
This article comes from: single aluminum plate curtain wall, aluminum arc, the professional supplier of aluminum honeycomb panel wood reserved require attribution, respect the original pay, respect for others is to respect yourself, if violations, we will pursue legal responsibility. More exciting from the golden Batai metal decoration, WeChat public number: jinbatai
