Aluminum honeycomb panel believe the word decorate circles will be heard and understand, aluminum honeycomb panel belongs to the now world boom products using a wide range, its main use high-quality fluorocarbon panel roller coating material, the panel thickness is 0.7 ~ 0.7 mm fluorocarbon roller coating board or transfer of the lacquer that bake,, bottom plate thickness of 0.5 ~ 1.1 mm, total thickness of 25 mm to 50 mm. Core material adopts hexagonal type 1100 aluminum honeycomb core, aluminum foil thickness 0.05 ~ 0.05 mm, length of 4 ~ 6 mm, the roller pressure molding process is complete, fully automatic CNC machine folding, positive and back side in the process of composite tightly bite. The whole process was done in the factory, USES the hot or cold pressing molding technology, because of high heat conduction between the skin and cellular aluminum value, both inside and outside aluminum heat bilges cold shrink synchronization; Honeycomb aluminum plates with holes, make the gas inside the plate could flow freely; Can install slide fastener system does not cause structural deformation during heat bilges cold shrink, so it can ensure high flatness. Use the stick glue: it's a two-component polyurethane high temperature curing glue, pressurized with automatic composite honeycomb panel production equipment through high temperature compound, overcome the brittleness of previous honeycomb board adhesive layer. Lining for special hexagonal aluminum honeycomb, made up of the hardness of H19, as the core board in adhesion in the sandwich structure, in wind pressure, shock absorption, sound insulation, thermal insulation, fire retardant and high specific strength performance. Abroad the sixties has been used in civilian areas, cut up under pressure. The containment of dense honeycomb like many small h beam, can bear the pressure from the other side of the panel, uniform plate stress, to ensure the panel in a large area can still keep high flatness.

Is used when installed on both sides of installation or up and down, slide fastener system installation allows heat bilges cold shrink, slide button at the bottom of the plate will be able to the expansion of the control panel direction. 25 mm en glue line system is beautiful and has self-cleaning function. After the completion of the production of cassette honeycomb panel, inside and outside the plate and the cellular structure to form a whole in addition, the hollow honeycomb can also greatly abate the plate body thermal expansion.

Because the honeycomb material with high resistance and development soon, cellular technology in recent years in our country is in civil industry in various fields of application. Aluminum honeycomb panel curtain wall with its light weight, high strength, stiffness big, and many other advantages, has been widely applied in the high-rise building exterior decoration. A total thickness of 20 mm, panel floor are 1.0 mm thick aluminum honeycomb panel is only 7 kg / ㎡. Honeycomb panel with the same stiffness weight is only 1/5 of the aluminum panel curtain wall, 1/10 of the steel plate, connected as thousands of i-steel, aluminum honeycomb core fixed core layer distribution throughout the board face, make the plate more stable, the wind resistance greatly than aluminum and aluminum veneer, and is not easy to deformation, the characteristics of high flatness, even if the frame size of the honeycomb panel is very large. Also can achieve very high flatness, building external wall decoration industry is the preferred product.

This article from: curtain wall aluminum veneer, arc aluminum rectangular tube, the professional supplier of wood grain aluminum honeycomb panel, reprint must indicate the source, respect the original pay, respect for others is equal to respect myself, if there are any infringement, we will shall be investigated for legal responsibility. More wonderful from golden bully tai metal decoration, WeChat number: public jinbatai